Quality and Testing
Test results, certifications and fire rating for STONIM® Premium Acrylic Solid Surface. Copies of test reports and certificates are available on request.
Typical values
| Property | Test method | Unit | Typical result |
|---|---|---|---|
| Density | ASTM D-792A | g/cm³ | 1.70 – 1.75 |
| Flexural Strength | ASTM D-790 | psi (min.) | 10,000 |
| Water Absorption | DIN EN 438-12 | % | < 0.1 |
| Hardness | ASTM D-2583 | Barcol | 60 – 65 |
| Thermal Expansion | ASTM D-696 | ×10-5/°F | 2.1 |
| Oxygen Index (LOI) | ASTM D-2863 | % | 38 |
| Tensile Strength | ASTM D-638 | psi | 6,000 – 6,500 |
| Elongation | ASTM D-638 | % | 0.4 |
| Ball Impact | NEMA LD 3 | 0.5 lb ball | No fracture (6 mm: 36″ · 12 mm: 144″) |
| Wear Resistance | ASTM D-4060 | g / 1000 cyc. | 0.05 |
| Gloss (60°) | NEMA LD 3 | Gardner | 5 – 20 |
| High Temperature | NEMA LD 3 | – | No visual change |
| Boiling Water | NEMA LD 3 | – | No visual change |
| Stain Resistance | ANSI Z124 | – | Pass (rating 41) |
| Flame Retardancy | DIN 4102-1 | – | Class B1 |
| Cigarette Burns | DIN 68861-6 | – | No visual change |
| Fungi & Bacteria | ASTM G21 & G22 | – | Does not support microbial growth |
Typical values for guidance only. Tests were carried out on sheets from our manufacturing facility in India; test reports are available on request.
Certified sheets, certified installation
Sheet certifications
Held by our manufacturing facility in India: ISO, SGS, Greenguard, TÜV, NSF, ISSFA and CE.
Fire rating
Tested to DIN 4102-1, Class B1.
Fabrication and installation
Tahani Al Bahir Contracting LLC, Dubai, fabricates and installs STONIM®, with ISO 9001, ISO 14001 and ISO 45001.
Registered trademark
STONIM® is a UAE registered trademark of Jugal Trading Co. LLC, No. 459801, Class 19. View the record on WIPO.
ISO 9001:2015
ISO 14001:2015
ISO 45001:2018From sheet to installation
- Sheets made on German automated manufacturing lines
- Fabrication and thermoforming in our own factory in Umm Al Quwain
- Seamless joints for a clean, hygienic finish
- 10-year warranty on sheets
- Samples at our Dubai showroom in Ras Al Khor
Common questions
Are test reports available?
Yes. Tests were carried out on sheets from our manufacturing facility in India. Ask us and we will share the test reports for your project.
What is the fire rating of STONIM® sheets?
STONIM® sheets are tested to DIN 4102-1 and rated Class B1.
Who holds the ISO certificates?
Tahani Al Bahir Contracting LLC, Dubai, which fabricates and installs STONIM®. It holds ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018.
Can I get a technical data sheet?
Yes. Download the one-page STONIM® Technical Data Sheet (PDF) from this page.
Need test reports or certificates for your project?
Tell us what your consultant needs and we will send the documents.